Showing posts with label network. Show all posts
Showing posts with label network. Show all posts
Sunday, November 21, 2010
Monday, November 15, 2010
NameCheap DNS Server Hostname
freedns1.registrar-servers.com
freedns2.registrar-servers.com
freedns3.registrar-servers.com
freedns2.registrar-servers.com
freedns3.registrar-servers.com
Tuesday, September 7, 2010
windows netsh command
netsh interface ipv4 show interfaces
Example result:
Idx Met MTU State Name
--- --- ----- ----------- -------------------
1 50 4294967295 connected Loopback Pseudo-Interface 1
9 20 1500 connected Local Area Connection
netsh interface ipv4 show interface 9
Example result:
Interface Local Area Connection Parameters
----------------------------------------------
IfLuid : ethernet_7
IfIndex : 9
Compartment Id : 1
State : connected
Metric : 20
Link MTU : 1500 bytes
Reachable Time : 19000 ms Base Reachable Time : 30000 ms Retransmission Interval : 1000 ms
DAD Transmits : 3 Site Prefix Length : 64 Site Id : 1 Forwarding : disabled
Advertising : disabled Neighbor Discovery : enabled Neighbor Unreachability
Detecion : enabled Router Discovery : dhcp Managed Address Configuration :
enabled Other Stateful Configuration : enabled Weak Host Sends : disabled Weak
Host Receives : disabled Use Automatic Metric : enabled Ignore Default routes :
disabled
Example result:
Idx Met MTU State Name
--- --- ----- ----------- -------------------
1 50 4294967295 connected Loopback Pseudo-Interface 1
9 20 1500 connected Local Area Connection
netsh interface ipv4 show interface 9
Example result:
Interface Local Area Connection Parameters
----------------------------------------------
IfLuid : ethernet_7
IfIndex : 9
Compartment Id : 1
State : connected
Metric : 20
Link MTU : 1500 bytes
Reachable Time : 19000 ms Base Reachable Time : 30000 ms Retransmission Interval : 1000 ms
DAD Transmits : 3 Site Prefix Length : 64 Site Id : 1 Forwarding : disabled
Advertising : disabled Neighbor Discovery : enabled Neighbor Unreachability
Detecion : enabled Router Discovery : dhcp Managed Address Configuration :
enabled Other Stateful Configuration : enabled Weak Host Sends : disabled Weak
Host Receives : disabled Use Automatic Metric : enabled Ignore Default routes :
disabled
Why is there no ARP reply in the packet trace
>Hello
> I'm having a situation concerning Arp where i am seeing no Arp
>reply's to many arp requests on my network when i evaluate with a
>protocol analyzer. I think the arp traffic may be at a level where it
>is disrupting traffic on the network and nodes are dropping off as a
>result. It is a microsoft 2000/xp network running active directory.
>The sniffs show alot of whois arp traffic and i see little or no arp
>reply's with the mac address. I'm wondering what this could be due
>too. It is a flat network with 175 nodes running a class b subnet.
>Wins and Dns are configured. The workstation nodes are mixed
>win2k/xp(majority being 2k), The servers are win2k. Is this high
>amount of arp traffic(between 60 to 90 percent at a server)normal and
>if not what could i do to facilitate the arp reply's. Thanks
How is your protocol analyzer connected to the network? If you're on a
switch, it would be logical that you don't see ARP reply's.
The ARP requests are in the fowm of a broadcast, so sent to every
port. However, the reply is sent as an unicast to the host which made
the ARP request.
Unless you configured a SPAN por, you won't see this traffic on a
switched network. This would also explain why you see such a high
percentage of ARP requests: the unicast traffic isn't captured by your
protocol analyzer.
With kind regards,
Patrick
> I'm having a situation concerning Arp where i am seeing no Arp
>reply's to many arp requests on my network when i evaluate with a
>protocol analyzer. I think the arp traffic may be at a level where it
>is disrupting traffic on the network and nodes are dropping off as a
>result. It is a microsoft 2000/xp network running active directory.
>The sniffs show alot of whois arp traffic and i see little or no arp
>reply's with the mac address. I'm wondering what this could be due
>too. It is a flat network with 175 nodes running a class b subnet.
>Wins and Dns are configured. The workstation nodes are mixed
>win2k/xp(majority being 2k), The servers are win2k. Is this high
>amount of arp traffic(between 60 to 90 percent at a server)normal and
>if not what could i do to facilitate the arp reply's. Thanks
How is your protocol analyzer connected to the network? If you're on a
switch, it would be logical that you don't see ARP reply's.
The ARP requests are in the fowm of a broadcast, so sent to every
port. However, the reply is sent as an unicast to the host which made
the ARP request.
Unless you configured a SPAN por, you won't see this traffic on a
switched network. This would also explain why you see such a high
percentage of ARP requests: the unicast traffic isn't captured by your
protocol analyzer.
With kind regards,
Patrick
Subscribe to:
Posts (Atom)